Fix the Rot Before It Reaches Your Roof Deck
Peeling paint, sagging eaves and squirrels in the attic all start at the same place. We replace rotted fascia and soffit with vented aluminum and vinyl systems that keep your attic breathing.
Northwest Indiana's Smart Choice for Fascia & Soffit Replacement
Fascia and soffit are the least glamorous parts of an exterior and the first place Northwest Indiana homes fail. Overflowing gutters soak the fascia board, the paint lets go, water wicks into the rafter tails, and within a few winters you have soft wood, sagging gutters, and an open invitation for squirrels, birds and wasps.
Smart Choice Exteriors replaces rotted wood rather than wrapping over it — wrapping bad fascia in aluminum just hides the problem while it keeps rotting. We install new sub-fascia where needed, wrap with heavy-gauge painted aluminum, and replace soffit with fully vented panels so your attic gets the intake air it needs to prevent ice dams and moisture damage.
What Makes Our Fascia & Soffit Work Different
Rot Replaced, Not Covered
We remove and replace compromised wood before wrapping. Aluminum over rotten fascia is a cosmetic fix that costs you twice.
Proper Attic Intake
Vented soffit panels sized to balance your ridge exhaust — the intake half of the ventilation equation most homes are missing.
Pest and Bird Exclusion
Tight-fitting panels and sealed corners close off the gaps squirrels, bats and starlings use to get into your attic.
No More Painting
Heavy-gauge painted aluminum and vinyl in matched colors mean the eaves you never want to climb again never need a brush.
Fascia & Soffit Replacement Project Gallery
From Free Estimate to Final Walkthrough
We probe fascia for soft spots, check rafter tails, evaluate existing soffit venting, and photograph problem areas.
Damaged fascia and sub-fascia removed and replaced with treated or primed lumber; rafter tails sistered where needed.
Fascia wrapped in custom-bent aluminum, vented soffit panels installed with proper channel and J-trim, gutters re-hung level.
Corners and terminations sealed, debris removed, and a walkthrough with photos of what was hidden behind the old wood.
Smart Materials, Honest Recommendations
We install what makes sense for your home and budget — never what pays the biggest commission. Here's what's on the menu for fascia & soffit replacement.
Custom-bent on site in 25+ colors to match your gutters, trim and siding, with a finish that outlasts paint by decades.
Maximum intake airflow for balanced attic ventilation — our default for most NWI homes.
Mixed panels for porch ceilings and gable ends where full venting isn't needed.
New structural backing behind the wrap so gutters have solid wood to hang from for the life of the roof.
Smart Answers For NWI Homeowners
+How do I know if my fascia is rotted?
Peeling paint, dark staining, sagging gutters, or wood that gives when you press it are the tells. From the ground, look for gutters pulling away from the roofline.
+What does fascia and soffit replacement cost?
Most NWI homes run $12–$28 per linear foot depending on wood repair needed, eave height and whether gutters must come down.
+Can you just wrap over my existing fascia?
Only if the wood is sound. Wrapping rotted fascia traps moisture and accelerates the decay — we'll show you photos of what we find before deciding.
+Do I need vented soffit?
If your attic has ridge or box vents but solid soffit, yes. Exhaust without intake pulls conditioned air out of your house and does nothing for the roof deck.
Get Your Fascia & Soffit Quote
Tell us about your project. A local NWI project manager will call you back within one business day.
How We Approach Fascia & Soffit In Your Town
Northwest Indiana isn't one market. Soils, wind exposure, housing stock, and permit rules change from town to town — and so does the way we build.
Older eaves with undersized gutters rot fastest here; we upsize gutters at the same time to stop the cycle.
Heavy tree canopy and clogged gutters make soaked fascia our most common call in these neighborhoods.
Century-old homes often need rafter tail repair and full sub-fascia replacement, not just a wrap.
Attic ventilation is usually the real issue — we add vented soffit to balance existing ridge vents.